First, they said that my windows 7 is not officially supported and should I install xp or vista.I have upgraded to windows Pro 8.1 with Media Center.
Aahd2 Hy Bios Windows 7 Is NotMy system information is below. Aahd2 Hy Bios Update Of TheUnfortunately, I couldnt locate an update of the BIOS for that motherboard at this time. When I turn on the computer the lights and the fan turns on but the screen remains black. ![]() I see several suggestions to pull CMOS jumpers, but fear just start riders pulling and causing damage. Im not comfortable with moving forward in fear of more damage. I then looked to do the flash of a CD - with the boot BACK on it, files but everywhere I read on line discussing this method - said most flash programs require you to save first the old BIOs files - you cant do from the BACK BIO Flash or at least I havent found a way to BACK startup disk. I used to hear creaking noises coming from the computer I learned normally come circuits on the motherboard power delivery, but as long as I heard those CPU would be on average around 50 degrees C at idle. I hear these noises and now the CPU is on average around 70-75 degrees C at idle. HP performance Advisor tells me Im in the normal range, but I want to just make sure that with programs like Autodesk Maya there, she become too hot and stop the machine. I dont know what the temp high-end is considered maximum security. This change could have due to the update of the Bios Thank you for your response and suggestions. I check in my BIOS power management settings has been developed the extended mode, but the temperature has always hovered around 70-78 degrees at idle. I checked Intel spec for this (E5 - 1650 6-core xeon) processor, clocked at 3.2 Ghz by heart, and although he said nothing on the TMax, he mentioned that the TCase (which he defined as the maximum temperature allowed integrated processor heat sink (IHS)) was 64 degrees Celsius. Now my temperature of the case, according to my HP Performance Advisor version 1.7.7517.0 is only about 24 degrees C, but I put my fan a little higher CPU, about 2009 rpm speed. This makes a little more noise, but my CPU temp has dropped to about 49. Before the change of the fan speed has been slightly more than 1300 RPM while the Advisor I have always said that it is in the range normal. Is it good to get the speed of the CPU fan like that or do I have to go a little lower. ![]() It is really something that you want to have, because it becomes a noisy vacuum cleaner with an excellent machine and quiet. First of all, it started exactly after the bios update when nothing else has been changed. Secondly, 5 years ago I had a very similar laptop (8710p) and when I have updated the bios to F.0F, its the same thing, but I fortunately downgraded the bios and everything was back to normal. In addition, reported others on the internet and these discussion forums. Its embarrassing: HP has released a update this feature breaks.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |